Monday, September 22, 2014

That was wrong and going on...

Next stop....garbage dump.
So that was the wrong thing and going on all the time. A chinese adaptor again! Messing up my digital signals. Oh yes, I monitored my JT65 signal today and noticed a hum, that was not there before. So I keyed the mike....no hum. It has to do with the computer I thought, but nothing did change. The hum was there even when switching off audio! So what changed in my shack? Well, the only thing changed was the new LED light powered by a chinese 12V adaptor. So I switched lights off and gone was the hum. Guess what happened with the adaptor? I now power the LEDs from the radio power supply. I managed to do some QSOs again on 30m and later on 17m. Now my 5W QRP signal was going to The Gambia C5YK and the contact was made. Seems to go easier now without the hum. A clean JT65/JT9 signal is very important I noticed. The rest of the day was devoted to WSPR on 10m. Though when I checked this evening the FT-817 was switched off and battery was completely dead. What happened? I checked the supply cord and the positive wire was broken just at the fuse housing. So unfortunate as 10m seems to be in good shape and I still hope for a spot from T5/T61AA. Have to repair the supply cord tommorow.

6 comments:

Paul Stam PAØK said...

Hallo Bas, ik heb nog een supply cord (made in China) liggen. :-) LED lampen dimmers van lampen zijn beruchte stoorbronnen. 73 Paul

VE9KK said...

That sure does sound like a full day of trouble shooting and problem solving! I have given up on the Chinese stuff, I find at the time it looks like a great deal but not. I will say they have been consistent in one way and that is failing soon after purchase.
Mike

PE4BAS, Bas said...

Hallo Paul, nee dat voedingssnoer mag je zelf houden ;-) Ja dimmers zijn berucht. Sommige LED lampen ook, al zit het hem nooit in de LED's zelf maar altijd in de voeding. Het vreemde is dat ik op ontvangst nergens last van had. Alleen op zenden en dat hoor je dan weer niet zo vaak. 73, Bas

PE4BAS, Bas said...

Hello Mike, it's value for your money. Just as much value as you pay for I mean :-( I really don't know how it is possible a pwr supply can give hum on transmit via the computer. Sounds like a groundloop, but there was no ground connected. It really stinks that is my opinion. 73, Bas

Hans said...

Hallo Bas,het zijn niet alleen de adapters voor dimmers maar ook voor je GSM, tablet en laptop. Zelfs mijn lader voor het opladen van de nieuwe interne batterij in mijn FT-817 veroorzaakte een flinke storing. Vervangen door ladertjes met trafo of anders de lader uit de wcd trekken als je op HF aan het werk ben. Het is een ellende. Succes met je DC snoertje. 73 Hans, PE1BVQ

PE4BAS, Bas said...

Hallo Hans, over het algemeen heb ik eigenlijk weinig problemen. Het was met name deze adaptor die storing gaf. Het zal wel komen dat ik de antenne toch wel een eindje van huis af heb staan. Dat heeft zo z'n voordelen. Maar inderdaad, je kan beter alles van een analoge voeding afhalen. Ik heb ergens wel eens iets gelezen dat als je teveel schakelende voedingen in huis hebt de powerfactor omhoog gaat. Het kan zelfs zo zijn dat hierdoor allerlei apparaten kapot gaan. Ik zal dat stukje nog eens zoeken...misschien interessant vor op het blog. 73, Bas