Saturday, October 31, 2026

My quest to learn CW (35)

 

Only a minor improvement this month. I'm sure hitting a wall this time. Some days go better as others. I really wish I could go faster, but it is what it is. At least there is some improvement.

Not much improvement on the random letters/numbers as well. Only 5 faults like last month didn't happy again. I guess that was just luck. Most of the times I got about 70-75% right. But I know it will take some months to have a reasonable improvement.

I made some interesting CW DX this month and this was a big motivation for sure. I noticed I like to use the straightkey the most although it is a little slower as the paddle. I prefer my J.H.Bunnell education key and think this will be kept in my shack. You always hear tips about a CW buddy you can practice with. I didn't find one although Rob HA7RJA is showing up often, I can almost call him my CW buddy. Last time we made a QSO on 12m with straightkeys on both sides.

Thursday, October 29, 2026

#CQWW SSB 2026 videos

 Some videos made. Actually one with a impression of my shack during the contest. And a view on my antennas. The other one is a visualization of my contacts during the weekend.




Enjoy!

Wednesday, October 28, 2026

#CQWW DX SSB 2026 review


Contest: CQWW DX SSB 2026
Station callsign: PA6G
Radio: Icom IC-7300 @100W
Microphone: Heil ProSet IC
Antenna 1: Inverted-V doublet 2x22m @12mh
Antenna 2: 3 band experimental Halo @16mh
Antenna 3: Gainmaster 1/2wave for 10m @16mh
Antenna 3: 4 element LFA for 10m @12mh

  A lot of fun in this worldwide contest. One of my favorites. You can work 100 DXCC in a weekend with a little effort. I worked 110 this time, last year I worked 122 DXCC but propagation was a lot better then. Not that I complain about propagation this year, it was excellent at times. I was surprised the 10m was open. If you listen outside the contest you rarely hear a station. 10m is still my favorite band but I encountered a small problem this time. The com port I use to communicate with the rotorcontrol froze every time I made a transmission on 10m, and that's the only band I need a rotor for. So what was happening here as I never had this before? It was obviously RFI getting into the computer and I quickly found that I used a longer network cable for internet since a few weeks. It could act as an antenna and pick up strong signals. The solution was fast and effective, three ferrite chokes were enough to eliminate the problem. I was glad to have automatic rotor control back during the contest, simply click ALT+J and there goes the antenna exactly to a wanted or heard DXCC. At that same moment you can concentrate on other things. If you are used to it you never want to miss it again.


You see, I use a lot of ferrites along all cables. I don't want to pick up QRM from the computer and of course my computer doesn't need the RFI from my radio.

Receive during contest

I always surprised by stations that are well over S9 on my side and do not hear me and other callers at all. What is going on here? I've noticed this at many contests and even had an e-mail exchange about it with a station long time ago. Their explanation was that the antenna was pointing in another direction. But I don't believe this, if the antenna is pointed into another direction why do I still receive such a station with S9 ? It also occured to me that propagation is not always reciproke, the path it takes to reach me could be not there the other way around. That happens often on groundwave and scatter propagation and on long distance DX. That could be an explanation. But this last weekend it happened to me very often, could be coincidence of course. Stations can have a lot of splatter from nearby stations, however if this occurs it is simply a matter of searching for a better frequency. Last explanation could be the use of very high power and in a multi station configuration other station could suck away the signals even when they use very good bandpass filters. Whatever the explanation is for bad RX it is very annoying for the other station. Especially when such a station is received with a very strong signal strength. On the other side of this are the stations that receive very well. One of them certainly was AH2R from Guam, received with a tiny signal at my end and worked on both 10m and 15m. And what about the American stations I worked on the very busy 40m band. Luckily there are a lot of stations that have an excellent receive. 

Unwritten rules

It is a normal procedure when calling on CW to send QRL? first. And SSB operators should always ask if a frequency is occupied as well. However, during this contest I noticed some, mostly east and south european stations, that didn't respect that. They just start calling on your running frequency. I know, it has always been like that. Is it on purpose or are they the same stations I mentioned before, without a good receiver? Worst thing was what happened to one of my hamradio friends, he asked if the frequency was occupied and no one answered, he started running. I heard him and spotted him on the cluster. But then, some south european station started calling and told my friend to go away because he holds the frequency for over 2 hours. Who owns frequencies on the HAM bands? As far as I know no one. Please be kind and ask if the frequency is occupied...

DX

I'm not really a contester, I'm a DXer. I love the struggle to work stations as far as possible on this earth. Especially love it when it takes effort.And some of the DX I worked took a lot of effort. Signals on 10m were not that strong and sometimes I went on to a next station to check the DX later. This is one of my tips: write down the frequency of the DX you want to work but is too weak or too busy and check it out later. You can be lucky later on or unlucky when propagation or the station has been gone. It is always a gamble of course but it works for me. VK9DX Norfolk Isl. was a lucky catch as well as AH2R Guam Isl. on both 10m and 15m. I missed the Alaskan signals on 20m, but suddenly I worked a very weak W1AW/KL7 on 20m late in the evening. Well just look what I worked in the contest on the map below. And yes, before asking, the Alaskan station is not plotted on the map because the locator is unknown.





31,5 hours of contesting is a lot for me. It certainly was longer as last year. Was it worth to sit behind the radio for such a long time? To me it was. It's my hobby and I love to work DX. This is very relaxing for me. And it is fun to write about it afterwards.
As always, when the 10m band is open, I spend way too long on this band. I got a very good antenna for this band so this is were I can make the best DX and the most mulitpliers. And although most of the contacts were on other bands I enjoyed the 10m band most. Below you can find a list.

I made a small video during the contest with an old digital camera from my dad. I found it somewhere on the attic. It makes surprisingly good videos. I will publish it later on the blog.

Thanks to everyone that has contacted me during the contest. I met a few very familiar calls and at least on fellow blogger. It was a pleasure to work you all. 73 and till next year.

  


Wednesday, October 21, 2026

Are we still safe in Europe?

   Recently there are reports in the news about a new OTH radar being build by Russia near Kaliningrad. I wonder if this will have another impact on the amateur radio frequenties as we all know OTH radar QRM on 20m and 10m and several other bands. 

Picture made with AI

I'm starting to get a little concerned about what Russia does with such an radar installation. From what I read on the internet they can detect missiles, jets etc. from a distance of 3000km which is in fact covering the whole of Europe. Of course you could do this for defense, but who is kidding who...

I'm living near a big seaport with large datacenters and one of the biggest power plants in our country. It is a very strategic site. And I repeat, I live very close to this. Recently they report unindentified drones flying over the area at night between one and eight O'clock. Especially in the weekends. And not only in this area but at a few strategic areas in my province. It is very disturbing and I'm a little concerned about this as well. It could be anything of course, but I don't like it at all. No one knows were the drones are coming from but since I live close to the coast it could be they are launched from a ship.

I'm sure this is not only happening in my area but in other (strategic) areas and countries as well. I wish I could do something about it but for ordinary people this is impossible. We can only just wait and see what happens. Hopefully the world and our area will not be on fire in a very soon future...

Sunday, October 11, 2026

Winslow J-37 Signal Corps trainingkey


    The third straightkey in my series about the keys I got from the real estate of PA3BCB Gerard. This time a J-37 key from the cold war era. Earlier keys in WW2 from this type had a steel or nickel lever, Winslow Tele-Tronics Inc. went over to fabricate the keys with matte black coating to prevent reflection and corrosion between te 1950's and 1960's.

The baseplate with the 2 bananaplug connectors is typical for use at training sites. That way they could quickly connect the keys to telegraphy boards and networks at the trainingbase. The baseplate is formed like that to wind the cord on it. It is really made for quickly connect and disconnect. Wind the cord and put it in you pocket.



Of course I wanted to clean the whole key and disassembled it. Here you see a detail of the strain relief made with paracord. A special gutter in the baseplate is made for this. Although I didn't keep the complete old connection cord I decided to keep this strain relief detail.

Use of the Winslow J-37 at the US Signal Corps

The AN/GSC-T1 Code Training Set: This was the definitive standard for Morse code training systems in army barracks. The system consisted of a central console for the instructor (who could generate Morse signals or interference) and dozens of student desks. The desks and audio distribution boxes (jack boxes) were equipped with banana plug sockets, allowing students to quickly connect their own J-37 keys. [1, 2]


AN/GTC-T1

The EE-81 / EE-95 Morse Instruction Sets: These were more compact, portable units designed for teaching Morse code in the field.

Modification ("Mae West" style): In the post-war years, the Corps of Engineers or technical services manually modified many J-37 units. A wooden or Bakelite baseplate with sockets was attached to the bottom, and the wiring was securely fastened using army-green lacing cord (the green string) to withstand the rough handling by hundreds of students. 

Many thousands of service members toiled for hours using setups exactly like this to earn their Morse code qualification in the cold war and Vietnam war era.



Polished and shiny J-37 straightkey ready to use.

Of course this key, as a cold war key, should be used to work at least one Russian station.


Wednesday, October 7, 2026

Friction-maxxing


   Click bait, click bait.... yes I have to admit. And I stole the word from the excellent blog of KE9V, sorry Jeff. The main reason is that you cannot directly comment on Jeff's blog and I wanted to bring this topic up as well. Read the original article here: https://ke9v.net/2026/09/17/friction-maxxing.html. 

“Friction-maxxing is the practice of intentionally choosing less convenient options in daily life to build tolerance for discomfort and reduce reliance on technology-driven ease. It’s often described as adding small bits of effort back into your routines to help you stop autopilot and improve focus.”

It's my opinion humanity needs friction-maxxing. All this new technology makes life easier, too easy in some ways... there is just too much tech. Sometimes technology is a good thing but these days with the development of AI everyone can make and program anything. You just need an idea and  AI makes the photo, video, story, essay, program, software, firmware etc. etc.. Not only for the good but also for the bad things. Look what is happening in several wars around the world. I'm sure drones are already made with AI since a few years. Personally I'm involved in installing robot lawnmowers. And I can tell the development including AI technology in these mowers is developing fast. We are not far away from mowers that you put on a field and just tell them to mow the grass without even really installing them. This same tech is used in drones, cars and other machines not only for peaceful intentions. 

Yes, above might be a bad example. But in our hobby you see AI doing the work. Lately websites and software for hamradio use are growing like mushrooms. Anyone noticed they all look the same? Even if they are for different applications you already see that sites and software are made with AI. Not that it is directly a bad thing, it makes life and the hobby easier. Too easy...

Too easy is not always a good thing, although because of technology some things are getting unnecessary complicated. Jeff already gave an example in this post. No wonder people get mentally ill because of this. Not everyone can keep up with the rapid changes of technology. Young people might keep up faster as old people.

I know people think different about this topic. But personally I'm sometimes thinking about downgrading my station. Not that I have the most tech advanced station but I just have too much digital mode software I use for making contacts. It is so easy to let the computer do the work, you just click your screen and the radio goes to the right frequency and the digimode does the work. When was the last time you just listened to radio without switching on your computer? For me it was not long ago, when on vacation in Denmark. I really enjoyed the simple setup I had. Just a (tr)uSDX, an homemade endfed antenna and a simple small plastic paddle. Yes, I logged on my phone, but a paper log would do. I make thousands of contacts every year but I only remember the ones that took real effort. This is one of the reasons I finally am seriously learning CW and make CW QSOs. Yes, even AI can decode morse and you can all do it with a computer. But real people make mistakes, a computer does not. This evening I had a contact with HA7RJA Rob on CW, and yes we were making mistakes but we loved it. And we knew there were real people on both ends.

What is your opinion about the fast growing tech and your daily life?

I like gardening. Doing work with my bare hands. It's the small things in life you don't need technology for. It's the simple things that make you happy. It's the things you do and build without needing technology and take real effort. And yes sometimes we have to learn that the hard way. How about you?

Monday, October 5, 2026

OZ/PE4BAS paper QSL cards

    I am not really a QSL card collector anymore but I know others do. So for my activation from Denmark last summer I made some paper cards to send around. The photo is made on the last day activation when testing out the lightweight endfed which did very well in the end. The complete card was made with the help of chatGPT. According to my XYL I do not look like that. The AI engine also changed the radio and other stuff. But actually I don't really care. It's just the idea. And most of the cards are ending in the bin anyway. For those that like the paper QSL I hope you appreciate it. Unfortunately


 I lost the FT8 log since I cannot start the laptop anymore it is completely broken now. Cards are only send out to all the CW and SSB contacts I made. But if I receive a card from a FT8 contact made I will reply.